PLEASE READ THIS PAGE COMPLETELY BEFORE ASKING QUESTIONS

This page contains:

• Upgrading OEM Non-NAV SYNC3 to NAV (APIM Replacement)
  
• ​4" to 8" Conversion
  
• Replacement APIMs for SYNC3 equipped vehicles (for failed APIMS)
  

• SYNC3 Upgrade from MFT/MLT (SYNC2) for Certain Vehicles has been moved to its own page

UPGRADING ORIGINALLY EQUIPPED NON-NAV SYNC3 VEHICLES TO NAV:

If you wish to upgrade your existing SYNC3 system to support OEM navigation the APIM only must be replaced.  This  will come programmed for your vehicle and there is an additional $25 charge for this on top of the cost of the APIM.  Please visit the store for current SYNC3 NAV APIM pricing, stock and descriptions.  Make a purchase of a NAV APIM in the store along with the $25 SYNC3 programming fee.

Upgrading SYNC 4" to SYNC3:

I do not sell kits/parts specific to the 4" upgrade for upgrading SYNC 4" screens to SYNC3 8 screens (except screen brackets - see store).  The parts required to do this include all the MFT to SYNC3 parts requirements listed below plus acquiring the correct HVAC/radio control bezel, additional USB media hub wiring, screen brackets, addition of wiring, re-wiring of vehicle harnesses, and advanced programming of vehicle systems.  I do not offer programming for these upgrades.

REPLACEMENT APIMS for Failed Units:

If you have a vehicle originally equipped with SYNC3 and the APIM has failed and is no longer under warranty please contact me via e-mail, Jason@FLVPmods.com.  There is a specific dealer programming process for replacement APIMs and only certain APIMs are true direct replacements for specific vehicles.  Replacements will be used/tested/guaranteed units.  This will be invoiced as I need to make sure I have the correct APIM and there is also a $50 programming charge for this.

​